Remove or modify in-channel hydraulic structures

From REFORM wiki
Revision as of 12:46, 23 November 2010 by IGBBerlin (Talk | contribs)

Jump to: navigation, search

Remove or modify in-channel hydraulic structures

Remove or modify in-channel hydraulic structures06. In-channel structure and substrate improvement

General description

Figure 1: Regular groynes and alternative V-shaped and notched groyne forms (modified from Kleinwächter et al. 2005).

In-channel hydraulic structures like groynes and deflectors are used in river engineering to stabilize banks and to concentrate the flow in the middle of the channel to achieve a sufficient fairway depth at medium and low discharges, resulting in a fixed river planform, a navigation channel that is relatively deep over a large part of its cross-section, and sedimentation between the groynes (groyne fields). In waterways, groyne fields are often the only shallow, low-velocity areas with some flow- and substrate diversity (although often impacted by ship-induced waves).

By removing or modifying in-channel hydraulic structures like groynes, flow- and substrate diversity can be further increased and aquatic and semi-terrestrial habitats can be improved. Different types of groynes have been used: V-shaped and notched groynes (see Figure below) and L-shaped groynes.

Regular inclined groynes deflect the water away from the river bank when submerged. V-shaped groynes also deflect the water away from the river bank, but in addition direct the current to the middle of the downstream groyne field, resuspending fine material which has deposited during low-flow periods. In contrast to one large eddy in regular groyne fields, flow-diversity is higher during low- and mean-flow periods. Notched groynes result in a second flow profile near the river bank at high flows and a more diverse flow-pattern during low- and mean-flows (Kleinwächter et al. 2005). Another groyne type are L-shaped groynes, where an additional parallel structure is build at the head of the inclined groyne parallel to the flow to protect the groyne field from ship-induced waves.

Applicability

Expected effect of measure on (including literature citations):

  • HYMO (general and specified per HYMO element)
  • physico � chemical parameters
  • Biota (general and specified per Biological quality elements)

Temporal and spatial response

Pressures that can be addressed by this measure

Cost-efficiency

Case studies where this measure has been applied

Useful references

Adam, P, N. Debiais and J. R. Malavois. 2007. Manuel de restauration hydromorphologique des cours d´eau. Fiche 3. Épis. Direction de l´eau, des milieux aquatiques et de l´agriculture (DEMAA) Service Eaux de Surface. L´Agence de l´eau Seine-Normandie.

Stream corridor Restoration: Principles, Processes and Practices. 2001. Federal Interagency Stream Restoration Working Group. USDA- Natural Resources Conservation Service

Other relevant information

Retrieved from "https://wiki.reformrivers.eu/index.php?title=Remove_or_modify_in-channel_hydraulic_structures&oldid=4552"