Improve/Create water storage
Contents
- 1 Improve/Create water storage
- 1.1 General description
- 1.2 Applicability
- 1.3 Expected effect of measure on (including literature citations):
- 1.4 Temporal and spatial response
- 1.5 Pressures that can be addressed by this measure
- 1.6 Cost-efficiency
- 1.7 Case studies where this measure has been applied
- 1.8 Useful references
- 1.9 Other relevant information
Improve/Create water storage
Category 01. Water flow quantity improvement
General description
Water flow and the flow regime can be altered by different factors such as changes in land cover, soil structure and compacting, loss of floodplains and wetlands, and stormwater runoff from urban areas. Loss of water retention combined with accelerated runoff typically increases the frequency and magnitude of flood peaks and reduces the availability of water to streams during low flow (base flow) periods (Saldi-Caromile et al., 2004). Water infiltration and retention can be increased at the catchment scale by e.g. changes in land cover and floodplain restoration (see measure water retention. The measures to improve water infiltration and retention may be applied in combination with other restoration measures (e.g. water storage, restoring side channels or former meander is firstly done for restore channel morphology and lateral connectivity but also increases infiltration area) at different spatial scale and location (riparian zone, nearby land, etc). Some techniques to improve water retention and infiltration are:
- Text
- Text
Applicability
Stormwater management
Stormwater reuse schemes are an effective way to reduce urban runoff volume. However, it is important to harvest only the larger flows than those occurring before the catchment was developed, to ensure that environmental flows are maintained in receiving waterways.
Expected effect of measure on (including literature citations):
- HYMO (general and specified per HYMO element)
- physico � chemical parameters
- Biota (general and specified per Biological quality elements)
Temporal and spatial response
Pressures that can be addressed by this measure
Cost-efficiency
Case studies where this measure has been applied
- Regge Velderberg
- Uilenkamp - Meander reconnection
- Sweden- Restoration of the Freshwater Pearl Mussel and its habitats (LIFE04/NAT/SE/000231)
- Polder Ingelheim – Restoring former floodplains (INTERREG Sustainable Development of Floodplains)
- Bemmelse Waard – Restoring former floodplains (INTERREG Sustainable Development of Floodplains)
- Hondsbroeksche Pleij – Restoring former floodplains (INTERREG Sustainable Development of Floodplains)
- Narew river restoration project
- Warta Middle River Valley
